Choose the Right Solar Security Light
Select a light rated for outdoor use with an adjustable solar panel, motion sensor, and weatherproof housing. Check the package for mounting hardware and confirm the sensor range suits your driveway or entrance.
Prepare the Installation Site
Pick a south-facing wall or post with at least six hours of direct sun. Clean the surface, mark the mounting holes, and use a drill with appropriate anchors. Avoid shading from trees or eaves.
Mount the Light and Connect Power
Attach the bracket, secure the unit, and route the solar panel cable if needed. For hardwired models, turn off the breaker, connect line and neutral to the specified terminals, and use a weatherproof junction box. Follow local electrical codes and manufacturer guidance from resources such as https://www.energysage.com/solar/.
Adjust Settings and Test
Position the sensor at the recommended height and angle. Enable night mode, set sensitivity, and verify the light activates with motion. Check the solar panel charge during the day to confirm reliable operation.
